What causes Siemens SINUMERIK alarm 100360?

Normal control operation generated this status message. User action or program command triggered this notification. System configuration or commissioning activity produced this message. Machine data or parameter change created this notification.

How do I fix Siemens SINUMERIK alarm 100360?

1. Read the complete message text on the SINUMERIK screen — note any parameter values shown. 2. If action is required, follow the instructions in the message. 3. Acknowledge the message on the operator panel to continue operation. 4. Consult the Siemens SINUMERIK alarm documentation for message 100360 if clarification is needed. 5. If this message appears unexpectedly, review recent parameter or configuration changes.

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 100360

Siemens 840D 100360 - Logic drive data saved

SINUMERIK alarm 100360 'Logic drive data saved' is an informational message indicating that drive parameter data has been successfully stored to the drive's non-volatile memory. This typically occurs during commissioning, parameter changes, or automatic backup operations.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

100360

Siemens 840D 100360 - Logic drive data saved

Logic drive data saved

Root Cause Summary

SINUMERIK alarm 100360 'Logic drive data saved' is an informational message indicating that drive parameter data has been successfully stored to the drive's non-volatile memory. This typically occurs during commissioning, parameter changes, or automatic backup operations.

Safety

Refer to Siemens documentation
Ensure qualified technician performs repairs

Causes and Fixes

1
Verify save operation completion
Check HMI alarm buffer to confirm successful completion of parameter save operation.
This is normal behavior - no action required unless unexpected
2
Check parameter consistency
Navigate to Commissioning > Drive > Parameters and verify all modified parameters are correctly stored.
Compare active parameters with saved values using parameter comparison function
3
Document changes
Record which parameters were modified in maintenance log for future reference.
Use SINUMERIK Operate backup function to create complete system backup

DIY Feasiblehigh confidence

Call a technician if:

·Repeated unexpected save operations
·Parameter corruption detected
·Drive behavior changes after save

Prevention

Regular parameter backups
Document all parameter changes
Use parameter sets for different operating modes

Common Mistakes

Ignoring this informational alarm
Not documenting parameter changes
Assuming alarm indicates a problem

Related Alarms

100361 100350 300500

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.