axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 840D 101113 - No channels configured !
Alarm 101113 indicates the control system has not completed its startup configuration process, specifically the channel machine data has not been properly initialized. This typically occurs when the initial commissioning was interrupted, machine data is corrupted or missing, or after a system restore that did not complete successfully.
101113
Siemens 840D 101113 - No channels configured !
No channels configured !
Siemens SINUMERIK message 101113: No channels configured!. This is an operator information message from the SINUMERIK control. Note the complete message text as it may contain important parameter values.
Root Cause Summary
Alarm 101113 indicates the control system has not completed its startup configuration process, specifically the channel machine data has not been properly initialized. This typically occurs when the initial commissioning was interrupted, machine data is corrupted or missing, or after a system restore that did not complete successfully.
Safety
- Refer to Siemens documentation
- Ensure qualified technician performs repairs
Causes and Fixes
- 1
Power cycle the complete control system (NCK and PLC) and allow full boot sequence to complete without interruption.
- 2
Access HMI Service mode and navigate to 'Startup' > 'Basic Machine' > 'Channel Data' and verify at least one channel is defined with valid machine data.
Document existing settings before making changes
- 3
If no channels exist, configure Channel 1 with minimum required machine data: channel name, geometry axis assignments, and save the configuration.
- 4
Perform a 'Complete Startup' (NCK Reset) from the Startup menu to finalize channel configuration and clear the alarm.
This will reload all machine data - ensure backup exists
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.