What causes Siemens SINUMERIK alarm 101111?

Normal control operation generated this status message. User action or program command triggered this notification. System configuration or commissioning activity produced this message. Machine data or parameter change created this notification.

How do I fix Siemens SINUMERIK alarm 101111?

1. Read the complete message text on the SINUMERIK screen — note any parameter values shown. 2. If action is required, follow the instructions in the message. 3. Acknowledge the message on the operator panel to continue operation. 4. Consult the Siemens SINUMERIK alarm documentation for message 101111 if clarification is needed. 5. If this message appears unexpectedly, review recent parameter or configuration changes.

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 101111

Siemens 840D 101111 - No axes configured !

Alarm 101111 indicates that the SINUMERIK 840D system has not completed its initial commissioning or startup procedure, resulting in no machine axes being configured in the system. This prevents access to axis-related service functions and machine data screens because the control has no valid axis definitions loaded.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

101111

Siemens 840D 101111 - No axes configured !

No axes configured !

Root Cause Summary

Alarm 101111 indicates that the SINUMERIK 840D system has not completed its initial commissioning or startup procedure, resulting in no machine axes being configured in the system. This prevents access to axis-related service functions and machine data screens because the control has no valid axis definitions loaded.

Safety

Refer to Siemens documentation
Ensure qualified technician performs repairs

Causes and Fixes

1
Power cycle the control and observe bootup sequence for errors or interruptions during initialization.
2
Access HMI Commissioning mode and launch the Startup Tool or Basic Machine Startup wizard from the main menu.
Ensure you have backup of existing data before proceeding with startup procedures.
3
Follow startup wizard to define at least one channel and configure minimum required axes with proper MD (machine data) including axis names, types, and assignments.
4
Save machine data, perform NCK reset (Power On Reset), and verify axes appear in axis list under Commissioning > Axis Machine Data.
NCK reset will restart the control - ensure machine is in safe state.

Service Recommended confidence

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.