Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 20-45 minutes

Alarm 75010

Siemens 75010 - CLC: block CLC_LIM value exceeds MD limit

One of the limits for the position offset of the clearance control programmed with CLC_LIM(.,.) is greater than the permissible limitation set in the associated MD. $MC_CLC_SENSOR_LOWER_LIMIT[ 1 ] or $MC_CLC_SENSOR_UPPER_LIMIT[ 1 ] Control reaction: Interpreter stop Alarm display.

Siemens SINUMERIKProgram/G-codeIntermediate20-45 minutes

75010

Siemens 75010 - CLC: block CLC_LIM value exceeds MD limit

CLC: block CLC_LIM value exceeds MD limit

One of the limits for the position offset of the clearance control programmed with CLC_LIM(.,.) is greater than the permissible limitation set in the associated MD. $MC_CLC_SENSOR_LOWER_LIMIT[ 1 ] or $MC_CLC_SENSOR_UPPER_LIMIT[ 1 ] Control reaction: Interpreter stop Alarm display.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • One of the limits for the position offset of the clearance control programmed with CLC_LIM( ...,...) is greater than the permissible limitation set in the associated MD. $MC_CLC_SENSOR_LOWER_LIMIT[ 1 ] or $MC_CLC_SENSOR_UPPER_LIMIT[ 1 ]

Troubleshooting Steps

  1. 1Modify parts program.
  2. 2Extend limitation in appropriate machine date.
  3. 3Clear alarm with the RESET key. Restart part program

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.