axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Advanced · 30-60 minutes
Siemens 62187 - Block : Swiveling in JOG --> G500 active and total basic WO or basic
During swiveling in JOG, it is not possible to write a rotation into the work offset WO, if, with active G500, rotations are already contained in the total basic WO or in the basic reference Error message 62187 can be masked -> see setting data 55410 $SCS_MILL_SWIVEL_ALARM_MASK
62187
Siemens 62187 - Block : Swiveling in JOG --> G500 active and total basic WO or basic
Block: Swiveling in JOG --> G500 active and total basic WO or basic
During swiveling in JOG, it is not possible to write a rotation into the work offset WO, if, with active G500, rotations are already contained in the total basic WO or in the basic reference Error message 62187 can be masked -> see setting data 55410 $SCS_MILL_SWIVEL_ALARM_MASK
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- During swiveling in JOG, it is not possible to write a rotation into the work offset WO, if, with active G500, rotations are already contained in the total basic WO or in the basic reference Error message 62187 can be masked -> see setting data 55410 $SCS_MILL_SWIVEL_ALARM_MASK
Troubleshooting Steps
- 1See notes for 62186 and 62187
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.