axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-45 minutes
Siemens 62186 - Block : No swiveling in JOG -> WO G active and total basic WO
On swiveling in JOG no rotation can be written to the work offset WO, if rotations are already contained in the total basic WO or in the basic reference Error 62186 message can be masked -> see setting data 55410 $SCS_MILL_SWIVEL_ALARM_MASK
62186
Siemens 62186 - Block : No swiveling in JOG -> WO G active and total basic WO
Block: No swiveling in JOG -> WO G active and total basic WO
On swiveling in JOG no rotation can be written to the work offset WO, if rotations are already contained in the total basic WO or in the basic reference Error 62186 message can be masked -> see setting data 55410 $SCS_MILL_SWIVEL_ALARM_MASK
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- On swiveling in JOG no rotation can be written to the work offset WO, if rotations are already contained in the total basic WO or in the basic reference Error 62186 message can be masked -> see setting data 55410 $SCS_MILL_SWIVEL_ALARM_MASK
Troubleshooting Steps
- 1%4 number of the active work offset WO
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.