Siemens SINUMERIK codes
axismd.ai
Siemens SINUMERIK Controller
Servo/Axis · Intermediate · 30-120 minutes
Alarm 300952
Siemens 300952 - Axis drive acceptance test is active
The acceptance test has been activated by the user Control reaction: Alarm display.
Siemens SINUMERIKServo/AxisIntermediate30-120 minutes
300952
Siemens 300952 - Axis drive acceptance test is active
Axis drive acceptance test is active
The acceptance test has been activated by the user Control reaction: Alarm display.
Safety
- Drive/power/encoder circuit: hazardous voltages may remain in the DC link after power-off. Lock out / tag out, wait for discharge per the drive documentation, and use qualified personnel only.
Common Causes
- The acceptance test has been activated by the user
Troubleshooting Steps
- 1This message disappears automatically when the test is finished.
- 2Alarm display showing cause of alarm disappears. No further operator action necessary. 2-771
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.