axismd.ai
Siemens SINUMERIK Controller
PLC · Intermediate · 30-120 minutes
Siemens 26072 - Axis cannot be controlled by the PLC
Axis cannot be made a PLC-controlled axis. For the time being, the axis cannot be controlled at any state from the PLC Control reaction: Interface signals are set. Alarm display.
26072
Siemens 26072 - Axis cannot be controlled by the PLC
Axis cannot be controlled by the PLC
Axis cannot be made a PLC-controlled axis. For the time being, the axis cannot be controlled at any state from the PLC Control reaction: Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- Axis cannot be made a PLC-controlled axis.
- For the time being, the axis cannot be controlled at any state from the PLC
Troubleshooting Steps
- 1Use Release or Waitp to make the axis a neutral one.
- 2Clear alarm with the Delete key or NC START
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.