axismd.ai
KUKA Robot Controller
Overheat/Thermal · Intermediate
KUKA Robot KRC0022 - Mainboard Overtemperature
Control cabinet fan failure. Effect: Robot motion stops and all active commands are inhibited until fault is resolved.
KRC0022
KUKA Robot KRC0022 - Mainboard Overtemperature
Mainboard Overtemperature
Control cabinet fan failure. Effect: Robot motion stops and all active commands are inhibited until fault is resolved.
Common Causes
- Control cabinet fan failure
- Ambient temperature too high
- Fan filter blocked
Troubleshooting Steps
- 1Check cabinet cooling fan
- 2Replace fan filter
- 3Reduce ambient temperature around cabinet
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.