axismd.ai
Heidenhain Controller
Parameter · Intermediate · 30-120 minutes
HEIDENHAIN 296-0004 - Process monitoring recordings are not compatible
Process monitoring recordings are no longer valid because settings were changed in the machine configuration.
296-0004
HEIDENHAIN 296-0004 - Process monitoring recordings are not compatible
Process monitoring recordings are not compatible
Process monitoring recordings are no longer valid because settings were changed in the machine configuration.
Safety
- Refer to Heidenhain service manual
- Ensure qualified technician performs repairs
Common Causes
- Machine config changed
- Process monitoring settings modified
- Existing recordings invalidated
Troubleshooting Steps
- 1Note the full error text and the NC software number of the control.
- 2Delete the existing process monitoring recordings.
- 3Perform new reference machining operations to create valid recordings.
- 4Contact your machine builder or HEIDENHAIN service if assistance is needed.
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.