What causes FANUC alarm 5227?

Machine system or function indicated by the alarm name has detected a fault. Control parameter or configuration error related to the alarm condition. Hardware component fault on the CNC or machine. Part program error or illegal operation for the indicated function. Machine interlock or safety condition not satisfied.

How do I fix FANUC alarm 5227?

1. Note the alarm number and check the Fanuc alarm screen for any sub-code or additional details. 2. Identify the specific machine system or function from the alarm name. 3. Power cycle the machine to clear transient faults. 4. Consult the Fanuc parameter or operator manual for alarm 5227 specific remedy. 5. Contact Fanuc service if the alarm persists after basic troubleshooting.

axismd.ai

FANUC Controller

Communication · Intermediate · 15-30 minutes

Alarm 5227

Fanuc Alarm 5227 - FILE NOT FOUND

Fanuc alarm 5227 FILE NOT FOUND occurs when the CNC attempts to access a file on the data server (internal memory, CF card, or network location) that does not exist at the specified path or has been deleted. This is typically triggered during program execution, DNC operation, or file transfer attempts when the requested file name or directory path is incorrect or the file has been removed from storage.

FANUCCommunicationIntermediate15-30 minutes

5227

Fanuc Alarm 5227 - FILE NOT FOUND

SYSTEM ALARM 5227

Root Cause Summary

Fanuc alarm 5227 FILE NOT FOUND occurs when the CNC attempts to access a file on the data server (internal memory, CF card, or network location) that does not exist at the specified path or has been deleted. This is typically triggered during program execution, DNC operation, or file transfer attempts when the requested file name or directory path is incorrect or the file has been removed from storage.

Causes and Fixes

1
Press SYSTEM > FILE soft key and navigate to the directory where the file should be located. Verify the exact filename including case sensitivity and extension (.NC, .TXT, etc.).
2
Check the program line that triggered the alarm. For subprogram calls (M98, G198, M198), verify the O-number or filename matches exactly what exists in memory. Note that some controls require //CNC_MEM/ prefix for internal memory files.
3
Check parameter 20 (TV check) and parameters 0020-0022 (I/O channel settings). Ensure the correct device path is specified if using external devices (CF card = 4, Ethernet = 6, USB = 5).
4
If using network data server, verify parameters 900-904 (Ethernet settings) and parameters 910-914 (FTP/SMB server configuration) are correctly configured and the network path is accessible.

DIY Feasiblehigh confidence

Call a technician if:

·Network infrastructure issues
·Hardware communication board failure
·Persistent parameter corruption

Prevention

Maintain consistent file naming conventions
Regular backup of CNC parameters
Use proper network security protocols
Implement file version control

Common Mistakes

Case sensitivity in filenames
Mixing communication protocols
Incorrect parameter 20 setting
Not checking file permissions on server

Related Alarms

5226 5228 5230 086 087

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.