axismd.ai
Siemens SINUMERIK Controller
Servo/Axis · Intermediate · 20-40 minutes
Siemens 61217 - Block : Cutting speed programmed for tool radius 0
To be able to work with cutting speed, the tool radius has to be specified Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
61217
Siemens 61217 - Block : Cutting speed programmed for tool radius 0
Block: Cutting speed programmed for tool radius 0
To be able to work with cutting speed, the tool radius has to be specified Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- To be able to work with cutting speed, the tool radius has to be specified
Troubleshooting Steps
- 1Enter a value for cutting speed.
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.