axismd.ai
Siemens SINUMERIK Controller
Servo/Axis · Intermediate · 20-40 minutes
Siemens 61222 - Block : Plane infeed greater than tool diameter
The plane infeed must not be greater than the tool diameter Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
61222
Siemens 61222 - Block : Plane infeed greater than tool diameter
Block: Plane infeed greater than tool diameter
The plane infeed must not be greater than the tool diameter Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Drive/power/encoder circuit: hazardous voltages may remain in the DC link after power-off. Lock out / tag out, wait for discharge per the drive documentation, and use qualified personnel only.
Common Causes
- The plane infeed must not be greater than the tool diameter
Troubleshooting Steps
- 1Reduce plane infeed.
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.