axismd.ai
Siemens SINUMERIK Controller
Tool Changer · Intermediate · 30-60 minutes
Siemens 61232 - Block : Impossible to load magazine tool
Only manual tools may be loaded into a swivel head in which only manual tools can be loaded Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
61232
Siemens 61232 - Block : Impossible to load magazine tool
Block: Impossible to load magazine tool
Only manual tools may be loaded into a swivel head in which only manual tools can be loaded Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- Only manual tools may be loaded into a swivel head in which only manual tools can be loaded
Troubleshooting Steps
- 1Load a manual tool into the swivel head or set the parameter "Tool change" on the setup screen form "Rotary axes" to "Automatic".
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.