Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Servo/Axis · Intermediate · 20-45 minutes

Alarm 61236

Siemens 840D 61236 - Channel block: ShopTurn subroutine cannot be executed as

Before a ShopTurn subroutine can be used, it has to be tested by ShopTurn. Alarm triggered by following cycle: F_HEAD.

Siemens SINUMERIKServo/AxisIntermediate20-45 minutes

61236

Siemens 840D 61236 - Channel block: ShopTurn subroutine cannot be executed as

Channel block: ShopTurn subroutine cannot be executed as

Before a ShopTurn subroutine can be used, it has to be tested by ShopTurn. Alarm triggered by following cycle: F_HEAD.

Safety

  • Refer to Siemens documentation
  • Ensure qualified technician performs repairs

Common Causes

  • ShopTurn subroutine has not been tested/compiled in ShopTurn before execution
  • Subroutine source file modified externally without re-testing in ShopTurn
  • Incorrect subroutine reference or missing subroutine in ShopTurn library
  • ShopTurn compilation errors or syntax issues in the subroutine code
  • Subroutine called from incompatible NC program context

Troubleshooting Steps

  1. 1Open the referenced ShopTurn subroutine in ShopTurn editor and verify syntax is correct
  2. 2Execute the 'Test' or 'Compile' function in ShopTurn for the subroutine to generate executable code
  3. 3Confirm the subroutine file has been saved and compiled after any recent modifications
  4. 4Verify the subroutine name in the NC program matches exactly the subroutine defined in ShopTurn
  5. 5Check ShopTurn error messages or warnings in the compilation log and correct any reported issues before re-testing

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.