Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Parameter · Intermediate · 20-45 minutes

Alarm 61183

Siemens 61183 - Block : Swivel CYCLE800: Retraction mode parameter lies outside

The value of the retraction mode parameter (_FR) lies outside the valid range

Siemens SINUMERIKParameterIntermediate20-45 minutes

61183

Siemens 61183 - Block : Swivel CYCLE800: Retraction mode parameter lies outside

Block: Swivel CYCLE800: Retraction mode parameter lies outside

The value of the retraction mode parameter (_FR) lies outside the valid range

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • The value of the retraction mode parameter (_FR) lies outside the valid range

Troubleshooting Steps

  1. 1Swivel CYCLE800: Check transfer parameter _FR.
  2. 2Value range 0 to 8

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.