Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Servo/Axis · Intermediate · 30-45 minutes

Alarm 61188

Siemens 61188 - Block : No axis name agreed for rotary axis 1 -> Check setup of the

No axis name was specified for the rotary axis 1

Siemens SINUMERIKServo/AxisIntermediate30-45 minutes

61188

Siemens 61188 - Block : No axis name agreed for rotary axis 1 -> Check setup of the

Block: No axis name agreed for rotary axis 1 -> Check setup of the

No axis name was specified for the rotary axis 1

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • No axis name was specified for the rotary axis 1

Troubleshooting Steps

  1. 1Check setup of swivel CYCLE800.
  2. 2Axis name of rotary axis 1 see parameter $TC_CARR35[n] n number of swivel data record Alarms

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.