Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 17605

Siemens 17605 - Block axis transformation active: inhibits rotation of axis

The programmed axis/spindle is active in a transformation and the axis container cannot be rotated for this reason Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

17605

Siemens 17605 - Block axis transformation active: inhibits rotation of axis

Block axis transformation active: inhibits rotation of axis

The programmed axis/spindle is active in a transformation and the axis container cannot be rotated for this reason Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.

Safety

  • Spindle hazard: ensure the spindle is at standstill before working near it; follow lockout/tagout procedures.

Common Causes

  • The programmed axis/spindle is active in a transformation and the axis container cannot be rotated for this reason

Troubleshooting Steps

  1. 1Modify part program.
  2. 2Deactivate the transformation for this axis/spindle before rotating the axis container or perform the axis container rotation later.
  3. 3Clear alarm with NC START or RESET key and continue the program

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.