Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 17600

Siemens 17600 - Block preset on transformed axis not possible

The programmed PRESET axis is involved in the current transformation. This means that setting the actual value memory (PRESET) is not possible for this axis. Example: Machine axis A should be set to the new actual value A 100 at the absolute position A 300.: N100 G90 G00 A=300 N101 PRESETON A=100 Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

17600

Siemens 17600 - Block preset on transformed axis not possible

Block preset on transformed axis not possible

The programmed PRESET axis is involved in the current transformation. This means that setting the actual value memory (PRESET) is not possible for this axis. Example: Machine axis A should be set to the new actual value A 100 at the absolute position A 300.: N100 G90 G00 A=300 N101 PRESETON A=100 Control reaction: Correction block is reorganized. Interface signals are set. Alarm display.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • The programmed PRESET axis is involved in the current transformation.
  • This means that setting the actual value memory (PRESET) is not possible for this axis.
  • Example: Machine axis A should be set to the new actual value A 100 at the absolute position A 300. : N100 G90 G00 A=300 N101 PRESETON A=100

Troubleshooting Steps

  1. 1Avoid preset actual value memory for axes which are participating in a transformation or deselect the transformation with the keyword TRAFOOF.
  2. 2Clear alarm with NC START or RESET key and continue the program

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.