axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 15-30 minutes
Siemens 17018 - Block incorrect value for parameter
An incorrect value has been assigned to the stated parameter. Only the following values are permissible for the parameter $P_WORKAREA_CS_COORD_SYSTEM =1 for workpiece coordinate system =3 for settable zero system Control reaction: Interpreter stop Interface signals are set. Alarm display.
17018
Siemens 17018 - Block incorrect value for parameter
Block incorrect value for parameter
An incorrect value has been assigned to the stated parameter. Only the following values are permissible for the parameter $P_WORKAREA_CS_COORD_SYSTEM =1 for workpiece coordinate system =3 for settable zero system Control reaction: Interpreter stop Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- An incorrect value has been assigned to the stated parameter.
- Only the following values are permissible for the parameter $P_WORKAREA_CS_COORD_SYSTEM =1 for workpiece coordinate system =3 for settable zero system
Troubleshooting Steps
- 1Assign another value.
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.