axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 10945 - Block curve table : illegal coupling of axes
It is not possible to program axis links for the leading axes and following axis programmed in CTABDEF Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
10945
Siemens 10945 - Block curve table : illegal coupling of axes
Block curve table: illegal coupling of axes
It is not possible to program axis links for the leading axes and following axis programmed in CTABDEF Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- It is not possible to program axis links for the leading axes and following axis programmed in CTABDEF
Troubleshooting Steps
- 1Correct NC part program.
- 2Alarms NCK alarms
- 3Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.