axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 10949 - Block curve table : missing master axis motion
A slave axis motion has been programmed without a master axis motion Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
10949
Siemens 10949 - Block curve table : missing master axis motion
Block curve table: missing master axis motion
A slave axis motion has been programmed without a master axis motion Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- A slave axis motion has been programmed without a master axis motion
Troubleshooting Steps
- 1Correct the part program and start it again.
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.