axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 10911 - Block transformation prohibits to traverse the pole
The given curve passes through the pole of the transformation Control reaction: Interpreter stop Local alarm reaction. NC Start disable in this channel. Interface signals are set. Alarm display.
10911
Siemens 10911 - Block transformation prohibits to traverse the pole
Block transformation prohibits to traverse the pole
The given curve passes through the pole of the transformation Control reaction: Interpreter stop Local alarm reaction. NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- The given curve passes through the pole of the transformation
Troubleshooting Steps
- 1Modify part program.
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.