What causes KUKA Robot alarm KRC0567?

Multi-disk program or data file transfer in progress with missing subsequent disk. Corrupted or unreadable floppy disk preventing continuation of data transfer. Incorrect disk sequence inserted out of order. Floppy disk drive malfunction or connection failure. Outdated backup or program storage using obsolete multi-disk format.

How do I fix KUKA Robot alarm KRC0567?

1. Verify that the correct next disk in the sequence is available and inspect for physical damage or dirt 2. Insert the next floppy disk firmly into the disk drive until it seats completely 3. Check the disk drive connection and ensure it is properly connected to the KRC controller 4. Confirm disk sequence numbering and labeling matches the expected transfer order 5. If using legacy multi-disk programs, consider migrating to modern USB or ethernet-based data transfer methods 6. Clear the alarm and resume the operation, or cancel the transfer if the disk sequence is incomplete and restart with verified media

KUKA Robot codes

axismd.ai

KUKA Robot Controller

System · Basic

Alarm KRC0567

KUKA Robot KRC0567 - Insert another disk

This alarm indicates that the KRC controller requires insertion of the next floppy disk during a multi-disk data transfer or program loading operation. This legacy alarm occurs when the controller expects additional disk media to continue reading or writing data that spans multiple physical disks.

KUKA RobotSystemBasic

KRC0567

KUKA Robot KRC0567 - Insert another disk

Insert another disk

Common Causes

Multi-disk program or data file transfer in progress with missing subsequent disk
Corrupted or unreadable floppy disk preventing continuation of data transfer
Incorrect disk sequence inserted out of order
Floppy disk drive malfunction or connection failure
Outdated backup or program storage using obsolete multi-disk format

Troubleshooting Steps

1Verify that the correct next disk in the sequence is available and inspect for physical damage or dirt
2Insert the next floppy disk firmly into the disk drive until it seats completely
3Check the disk drive connection and ensure it is properly connected to the KRC controller
4Confirm disk sequence numbering and labeling matches the expected transfer order
5If using legacy multi-disk programs, consider migrating to modern USB or ethernet-based data transfer methods
6Clear the alarm and resume the operation, or cancel the transfer if the disk sequence is incomplete and restart with verified media

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.