axismd.ai
Heidenhain Controller
Servo/Axis · Intermediate · 30-120 minutes
HEIDENHAIN 230-02EE - The option for HSC filter has not been enabled
Alarm 230-02EE occurs when HSC (High Speed Cutting) filter parameters are configured in the servo settings but the HSC software option is not enabled in the control. The system automatically falls back to the triangle filter for the affected axis.
230-02EE
HEIDENHAIN 230-02EE - The option for HSC filter has not been enabled
The option for HSC filter has not been enabled
An HSC filter was configured but the software option is not enabled. The system has automatically activated the triangle filter as a fallback.
Root Cause Summary
Alarm 230-02EE occurs when HSC (High Speed Cutting) filter parameters are configured in the servo settings but the HSC software option is not enabled in the control. The system automatically falls back to the triangle filter for the affected axis.
Safety
- Refer to Heidenhain service manual
- Ensure qualified technician performs repairs
Causes and Fixes
- 1
Check Software Options
Access MOD function, select 'Software options' and verify if HSC filter option is listed and enabled.
Look for option number 8 or HSC-related entries in the software options list
- 2
Review Machine Parameters
Check MP1420 (HSC filter frequency) and MP1421 (HSC filter damping) for configured values on the affected axis.
Do not modify these parameters without understanding their impact on machining performance
- 3
Contact Heidenhain for License
If HSC filtering is required, contact Heidenhain service to purchase and activate the HSC software option.
Have your control serial number and current software version ready when contacting service
Call a technician if:
- ·Software option purchase required
- ·Servo instability after parameter changes
- ·Hardware compatibility issues
Prevention
- Verify software options before configuring advanced parameters
- Document all parameter changes
- Regular software license audits
Common Mistakes
- Assuming HSC option is standard
- Modifying parameters without checking software licensing
- Not documenting original parameter values
Related Alarms
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.