axismd.ai
Siemens SINUMERIK Controller
Servo/Axis · Intermediate · 20-45 minutes
Siemens 6416 - Tool with tool edge no. has reached tool monitor warning limit
This message informs that at least one cutting edge of the time or quantity monitored tool has reached its monitoring limit. The limit was detected in the channel context. The alarm originated during NC program execution Control reaction: Interface signals are set. Alarm display.
6416
Siemens 6416 - Tool with tool edge no. has reached tool monitor warning limit
Tool with tool edge no. has reached tool monitor warning limit
This message informs that at least one cutting edge of the time or quantity monitored tool has reached its monitoring limit. The limit was detected in the channel context. The alarm originated during NC program execution Control reaction: Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- This message informs that at least one cutting edge of the time or quantity monitored tool has reached its monitoring limit.
- The limit was detected in the channel context.
- The alarm originated during NC program execution
Troubleshooting Steps
- 1For information only.
- 2The user must decide what to do.
- 3Clear alarm with the Delete key or NC START
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.