Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 20-45 minutes

Alarm 62105

Siemens 62105 - Block : Number of columns or lines equals zero

Block: Number of columns or lines equals zero

Siemens SINUMERIKProgram/G-codeIntermediate20-45 minutes

62105

Siemens 62105 - Block : Number of columns or lines equals zero

Block: Number of columns or lines equals zero

Block: Number of columns or lines equals zero

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Troubleshooting Steps

  1. 1Check parameters _NUM1 and _NUM2

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.