Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Basic · 10-20 minutes

Alarm 62103

Siemens 62103 - Block : No finishing allowance programmed

No finishing allowance is programmed, although it is necessary for this machining Control reaction: Alarm display.

Siemens SINUMERIKProgram/G-codeBasic10-20 minutes

62103

Siemens 62103 - Block : No finishing allowance programmed

Block: No finishing allowance programmed

No finishing allowance is programmed, although it is necessary for this machining Control reaction: Alarm display.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • No finishing allowance is programmed, although it is necessary for this machining

Troubleshooting Steps

  1. 1Programm a finishing allowance.
  2. 2Clear alarm with the Delete key or NC START

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.