Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Advanced · 45-120 minutes

Alarm 61358

Siemens 61358 - Block : Error during recording

Internal error

Siemens SINUMERIKProgram/G-codeAdvanced45-120 minutes

61358

Siemens 61358 - Block : Error during recording

Block: Error during recording

Internal error

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • Internal error

Troubleshooting Steps

  1. 1Note the full alarm text and any values shown with it.
  2. 2Contact the machine builder or Siemens technical support with the alarm details.

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.