Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Advanced · 30-60 minutes

Alarm 61359

Siemens 61359 - Block : - continue with RESET

Internal error Alarms

Siemens SINUMERIKProgram/G-codeAdvanced30-60 minutes

61359

Siemens 61359 - Block : - continue with RESET

Block: - continue with RESET

Internal error Alarms

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • Internal error Alarms

Troubleshooting Steps

  1. 1Note the full alarm text and any values shown with it.
  2. 2Contact the machine builder or Siemens technical support with the alarm details.

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.