axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 20-45 minutes
Siemens 61357 - No resources free
Not enough NC memory space available or too many files / directories in the NC file system Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
61357
Siemens 61357 - No resources free
No resources free
Not enough NC memory space available or too many files / directories in the NC file system Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- Not enough NC memory space available or too many files / directories in the NC file system
Troubleshooting Steps
- 1Delete or unload files MD18270: $MN_MM_NUM_SUBDIR_PER_DIR, MD18280: $MN_MM_NUM_FILES_PER_DIR or MD18320: Check $MN_MM_NUM_FILES_IN_FILESYSTEM and increase if necessary.
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.