axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 20-40 minutes

Alarm 61306

Siemens 61306 - Block : Permissible measuring difference exceeded

Block: Permissible measuring difference exceeded

Siemens SINUMERIKProgram/G-codeIntermediate20-40 minutes

61306

Siemens 61306 - Block : Permissible measuring difference exceeded

Block: Permissible measuring difference exceeded

Safety

Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Troubleshooting Steps

1For 840D sl - up to SW 2.6 SP1 and for 828D - up to SW 4.3: - Check setpoint value and parameter DIF For 840D sl - as from SW 2.7 and for 828D - as from SW 4.4: - Check setpoint value and parameter DIF

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.