axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 20-45 minutes
Siemens 61115 - Block : Approach or retract mode(straight / circle / plane / space)
The approach or retract mode to/from the contour has been incorrectly defined Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
61115
Siemens 61115 - Block : Approach or retract mode(straight / circle / plane / space)
Block: Approach or retract mode(straight / circle / plane / space)
The approach or retract mode to/from the contour has been incorrectly defined Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- The approach or retract mode to/from the contour has been incorrectly defined
Troubleshooting Steps
- 1Check parameter _AS1 or _AS2.
- 2Clear alarm with the RESET key. Restart part program Continuation: Alarms
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.