axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 15-30 minutes
Siemens 61116 - Block : Approach or retract path = 0
The approach or retract path has been specified with zero Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
61116
Siemens 61116 - Block : Approach or retract path = 0
Block: Approach or retract path = 0
The approach or retract path has been specified with zero Control reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- The approach or retract path has been specified with zero
Troubleshooting Steps
- 1Check parameter _LP1 or _LP2.
- 2Clear alarm with the RESET key. Restart part program
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.