axismd.ai
Siemens SINUMERIK Controller
Servo/Axis · Basic · 10-20 minutes
Siemens 61124 - Block: Infeed width is not programmed
Siemens SINUMERIK alarm 61124: Block: Infeed width is not programmed. Detailed remedy is being verified against the current Siemens diagnostics manual.
61124
Siemens 61124 - Block: Infeed width is not programmed
Block: Infeed width is not programmed
Siemens SINUMERIK alarm 61124: Block: Infeed width is not programmed. Detailed remedy is being verified against the current Siemens diagnostics manual.
Safety
- Drive/power/encoder circuit: hazardous voltages may remain in the DC link after power-off. Lock out / tag out, wait for discharge per the drive documentation, and use qualified personnel only.
Troubleshooting Steps
- 1Note the full alarm text and any values shown with it (channel, block, axis).
- 2Check the SINUMERIK diagnostics manual for your control version, or contact the machine builder.
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.