What causes Siemens SINUMERIK alarm 380050?

Encoder cable damaged or connector loose at drive or encoder end. Encoder signal amplitude below minimum specification — contamination or cable issue. SSI or EnDat measuring system communication fault. Encoder supply voltage out of specification. Measuring system hardware failure.

How do I fix Siemens SINUMERIK alarm 380050?

1. Check encoder/measuring system cable for damage and reseat connectors. 2. Clean the measuring system reading head and scale if contamination is present. 3. Verify encoder supply voltage at the connector. 4. Check SINAMICS drive diagnostics for detailed fault sub-codes. 5. Replace encoder cable first; replace sensor head if cable checks out.

Siemens SINUMERIK codes

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 380050

Siemens 840D 380050 - Profibus-DP: multiple assignment of inputs on address

This alarm occurs due to multiple assignments of input data at the same logical address in the Profibus-DP configuration. Fix by identifying and correcting the duplicate address assignment.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

380050

Siemens 840D 380050 - Profibus-DP: multiple assignment of inputs on address

Profibus-DP: multiple assignment of inputs on address

Siemens SINAMICS drive alarm 380050: Profibus-DP: multiple assignment of inputs on address. The encoder or position measuring system connected to the SINAMICS drive has reported a fault. This prevents reliable position feedback for the affected axis.

Root Cause Summary

This alarm occurs due to multiple assignments of input data at the same logical address in the Profibus-DP configuration. Fix by identifying and correcting the duplicate address assignment.

Safety

Refer to Siemens documentation
Ensure qualified technician performs repairs

Causes and Fixes

1
Check alarm details
Note the logical address mentioned in the alarm message (%1).
2
Review configuration
Open the Profibus-DP configuration and locate duplicate assignments for the reported address.
3
Correct assignment
Reassign inputs to unique logical addresses and save the configuration.
4
Restart system
Clear the alarm and restart the system to apply changes.

DIY Feasiblehigh confidence

Call a technician if:

·If the alarm persists after correcting address assignments
·If unable to access or modify Profibus configuration

Prevention

Double-check logical address assignments during Profibus setup
Use configuration validation tools before deployment
Maintain backup copies of known-good configurations
Document all address assignments for future reference

Common Mistakes

Overlooking duplicate addresses in large configurations
Failing to save changes after editing configuration

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.