axismd.ai
Siemens SINUMERIK Controller
Servo/Axis · Intermediate · 30-120 minutes
Siemens 300738 - Axis drive module number for measuring system not possible
The NC has assigned the direct measuring system to an axis which doesn't have a motor measuring system. This error can only occur with the 810D! Control reaction: NC not ready. The NC switches to follow-up mode. Channel not ready. NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm.
300738
Siemens 300738 - Axis drive module number for measuring system not possible
Axis drive module number for measuring system not possible
The NC has assigned the direct measuring system to an axis which doesn't have a motor measuring system. This error can only occur with the 810D! Control reaction: NC not ready. The NC switches to follow-up mode. Channel not ready. NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm.
Safety
- Drive/power/encoder circuit: hazardous voltages may remain in the DC link after power-off. Lock out / tag out, wait for discharge per the drive documentation, and use qualified personnel only.
Common Causes
- The NC has assigned the direct measuring system to an axis which doesn't have a motor measuring system.
- This error can only occur with the 810D!
Troubleshooting Steps
- 1Please inform the authorized personnel/service department.
- 2Check the configuration of the direct measuring system.
- 3See NC-MD 30220: $MA_ENC_MODULE_NR and NC-MD 30230: $MA_ENC_INPUT_NR.
- 4Switch control OFF - ON
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.