axismd.ai
Siemens SINUMERIK Controller
Servo/Axis · Intermediate · 30-120 minutes
Siemens 300708 - Axis drive current controller cycle times of axes differ
The current controller cycle MD 1000: $MD_CURRCTRL_CYCLE_TIME must be identical for both axes on 2-axis modules Control reaction: NC not ready. The NC switches to follow-up mode. Channel not ready. NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm.
300708
Siemens 300708 - Axis drive current controller cycle times of axes differ
Axis drive current controller cycle times of axes differ
The current controller cycle MD 1000: $MD_CURRCTRL_CYCLE_TIME must be identical for both axes on 2-axis modules Control reaction: NC not ready. The NC switches to follow-up mode. Channel not ready. NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm.
Safety
- Drive/power/encoder circuit: hazardous voltages may remain in the DC link after power-off. Lock out / tag out, wait for discharge per the drive documentation, and use qualified personnel only.
Common Causes
- The current controller cycle MD 1000: $MD_CURRCTRL_CYCLE_TIME must be identical for both axes on 2-axis modules
Troubleshooting Steps
- 1Please inform the authorized personnel/service department.
- 2The current controller cycle MD 1000: $MD_CURRCTRL_CYCLE_TIME must be identical for both axes on 2-axis modules.
- 3Switch control OFF - ON. 2-721
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.