Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 20-45 minutes

Alarm 15170

Siemens 15170 - Block program could not be compiled

An error has occurred in compile mode. The (compiler) error message refers to the program specified here Control reaction: Alarm display.

Siemens SINUMERIKProgram/G-codeIntermediate20-45 minutes

15170

Siemens 15170 - Block program could not be compiled

Block program could not be compiled

An error has occurred in compile mode. The (compiler) error message refers to the program specified here Control reaction: Alarm display.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • An error has occurred in compile mode.
  • The (compiler) error message refers to the program specified here

Troubleshooting Steps

  1. 1Modify part program.
  2. 2Clear alarm with the Delete key or NC START

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.