Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 120000

Siemens 120000 - Area cannot be loaded! Acknowledge alarm, press area switchover key!

One of the applications listed in the REGIE.INI could not be started Control reaction: Alarm display.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

120000

Siemens 120000 - Area cannot be loaded! Acknowledge alarm, press area switchover key!

Area cannot be loaded! Acknowledge alarm, press area switchover key!

One of the applications listed in the REGIE.INI could not be started Control reaction: Alarm display.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • One of the applications listed in the REGIE.INI could not be started

Troubleshooting Steps

  1. 1Check whether the entry in REGIE.INI is correct.
  2. 2Internal

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.