axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 120003 - Area cannot be deactivated. Please try again
Within the scope of an area switchover, an area is to be deselected. However, the area refuses this. The area switchover does not take place Control reaction: Alarm display.
120003
Siemens 120003 - Area cannot be deactivated. Please try again
Area cannot be deactivated. Please try again
Within the scope of an area switchover, an area is to be deselected. However, the area refuses this. The area switchover does not take place Control reaction: Alarm display.
Safety
- Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.
Common Causes
- Within the scope of an area switchover, an area is to be deselected.
- However, the area refuses this.
- The area switchover does not take place
Troubleshooting Steps
- 1Try again and, if possible, first close the area that could not be deactivated.
- 2Internal
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.