Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 120005

Siemens 120005 - Please acknowledge the dialog box in area

The area could not be deselected, as in this area a dialog box is still open Control reaction: Alarm display.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

120005

Siemens 120005 - Please acknowledge the dialog box in area

Please acknowledge the dialog box in area

The area could not be deselected, as in this area a dialog box is still open Control reaction: Alarm display.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • The area %1 could not be deselected, as in this area a dialog box is still open

Troubleshooting Steps

  1. 1Close the dialog box in area %1!
  2. 2Internal

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.