What causes Siemens SINUMERIK alarm 113034?

Required machine data or parameter not configured for the requested function. Option bit not set in SINUMERIK to enable the required functionality. Program references a function or axis that has not been configured. Machine commissioning incomplete — required setup step was not performed. Configuration data cleared or lost due to a parameter reset or hardware change.

How do I fix Siemens SINUMERIK alarm 113034?

1. Read the full alarm message to identify what is missing (axis name, parameter number, function name). 2. Consult the SINUMERIK alarm manual for alarm 113034 for the specific configuration requirement. 3. Check the relevant machine data group and set the required parameter. 4. If a specific option is required, verify it is licensed and enabled in the SINUMERIK option settings. 5. Power cycle after making configuration changes to apply the new settings.

Siemens SINUMERIK codes

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 113034

Siemens 840D 113034 - No softkey is allowed in this state - ignored

This alarm occurs when a softkey is pressed in an invalid state, often due to incorrect program syntax or unsupported functions. Correct the program or verify control options to resolve it.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

113034

Siemens 840D 113034 - No softkey is allowed in this state - ignored

No softkey is allowed in this state - ignored

Siemens SINUMERIK alarm 113034: No softkey is allowed in this state - ignored. This alarm indicates a required configuration element, parameter, or program component is missing or has not been set up.

Root Cause Summary

This alarm occurs when a softkey is pressed in an invalid state, often due to incorrect program syntax or unsupported functions. Correct the program or verify control options to resolve it.

Safety

Refer to Siemens documentation
Ensure qualified technician performs repairs

Causes and Fixes

1
SAFETY FIRST - Stop all operations
Press EMERGENCY STOP and ensure machine is in a safe state before troubleshooting. Verify no automatic operations are running.
2
Check current mode
Verify the operating mode (e.g., AUTO, MDA, JOG) and ensure it matches the intended softkey action.
3
Review program state
Check if the program is in a valid state to accept the softkey input; reset if needed.
4
Retry operation
Clear the alarm and attempt the softkey action again in the correct mode.

DIY Feasiblehigh confidence

Call a technician if:

·If the alarm persists despite mode correction
·If the required option cannot be enabled without assistance

Prevention

Always ensure machine is in safe state before mode changes
Ensure correct operating mode before using softkeys
Verify control configuration matches program requirements
Follow proper lockout/tagout procedures when troubleshooting

Common Mistakes

Pressing softkeys in the wrong mode
Assuming all functions are enabled by default

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.