104237

Verify the displayed magazine position number matches the expected tool pocket location in the tool management screen (magazine layout).

Check if a tool change operation is in progress or has just completed successfully. Monitor the machine for normal continuation of the program.

If the message persists on screen, press the acknowledgment or cancel button to clear the informational display.

Document the displayed position number if this message appears unexpectedly or repeatedly during operations not involving tool changes.

Perform a magazine reference point operation from the service or startup screen to re-synchronize the magazine position with the control system.

Ensure the tool changer area is clear of obstructions and personnel before initiating reference point operation.

Check PLC inputs for magazine zero position sensor and magazine in-position signals to verify proper sensor function and signal status.

Verify magazine gear backlash compensation and positioning parameters in the PLC or machine data are correctly configured for your magazine type.

Inspect the magazine positioning encoder or proximity sensors for contamination, damage, or loose mounting that could cause position detection errors.

Access the tool management screen and verify that the tool list matches the physical tools currently loaded in the magazine at the displayed position.

Check the alarm log for any preceding alarms related to tool management, magazine motor errors, or position monitoring faults that may have triggered this informational message.

If tool data was recently modified or restored from backup, perform a complete magazine inventory check to ensure tool data synchronization with physical magazine contents.

Do not run production programs until tool data accuracy is confirmed to prevent tool collision or incorrect tool selection.

Review recent service operations in the control logbook. If magazine maintenance or PLC program modifications were performed, verify proper system restart and initialization procedures were followed.