axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 840D 104236 - Load points
Alarm 104236 is an informational message displayed during program execution that shows the number of load points currently in use or available in the program memory. This typically appears during program loading, simulation, or when checking memory allocation for complex contour definitions or spline interpolations.
104236
Siemens 840D 104236 - Load points
Load points
Siemens SINUMERIK operator message 104236: Load points. This is an informational message from the SINUMERIK control indicating a system status or operation result that may require operator action.
Root Cause Summary
Alarm 104236 is an informational message displayed during program execution that shows the number of load points currently in use or available in the program memory. This typically appears during program loading, simulation, or when checking memory allocation for complex contour definitions or spline interpolations.
Safety
- Refer to Siemens documentation
- Ensure qualified technician performs repairs
Causes and Fixes
- 1
Acknowledge the message by pressing the RECALL key or information acknowledgment button on the control panel.
- 2
Verify that the program loaded successfully by checking the program display and confirming no additional error alarms are present.
- 3
If the message appears repeatedly, note the %1 parameter value which indicates the actual number of load points being used.
- 4
Continue normal operation unless other alarms or warnings accompany this message.
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.