104240

Verify the displayed location (%1 value) matches your intended search target block number or label name.

Check the NC program pointer position on the HMI to confirm the cursor is at the correct program line.

Review machine axis positions to ensure safe conditions before continuing program execution from this location.

Do not start machining without verifying tool position and workpiece setup to prevent collisions.

Acknowledge the message and proceed with NC START or continue with your intended operation.

Verify all axes have returned to the interruption point by checking the actual position values against the saved interruption coordinates.

Confirm spindle orientation and state matches the conditions at the point of interruption if orientation-dependent operations were active.

Check that all modal functions (G-codes, M-codes, tool offsets) are correctly restored as displayed in the channel state overview.

Tool compensation and coordinate system settings must match the interruption point to avoid dimensional errors.

Acknowledge the alarm and resume program execution with NC START, monitoring the first moves carefully.

Verify the REF indicator lights are illuminated for all required axes on the HMI axis status display.

Check machine data MD34100 REFP_CAM_IS_ACTIVE to confirm reference point switches are properly configured and detected.

Perform a test movement on each referenced axis to verify correct direction and position feedback.

If axis movement direction is reversed or position values are incorrect, do not proceed with machining - check encoder connections and parameters.

Acknowledge the message and proceed with normal machine operation or workpiece setup.