100900

Read the HMI screen carefully to identify what selection is being requested (tool number, coordinate system, offset, or other parameter).

Verify the correct option based on the current machining operation, workpiece setup, and program requirements.

Press the INPUT key on the machine control panel to confirm your selection.

Ensure the selected option is correct before confirming, as this will directly affect program execution and machining results.

Monitor the program execution to verify it continues correctly after input confirmation.

Check the current program line on the HMI to identify which M-code or T-code is awaiting confirmation.

Verify machine conditions are safe for the pending operation (correct tool loaded, workpiece secured, coolant ready, etc.).

Do not confirm tool or auxiliary function changes without verifying physical machine readiness.

Press the INPUT key to acknowledge and execute the M or T function.

If this confirmation requirement is undesired, review machine data settings (MD or PLC) to modify confirmation requirements for specific M/T codes.

Identify what parameter or data value the system is requesting from the operator display.

If measurement or probing data is required, perform the necessary manual measurement using appropriate tools or methods.

Enter the required value using the HMI keyboard or input fields, then press INPUT to confirm and transfer the data to the control.

Verify entered values are within acceptable ranges and use correct units (metric/imperial) to prevent machining errors.

Observe cycle continuation to ensure the entered data produces the expected machine behavior.