What causes Siemens SINUMERIK alarm 100001?

Normal system operation generated this status message. User action or program command triggered this notification. Machine data or parameter change created this notification. System startup or initialization process generating a status report.

How do I fix Siemens SINUMERIK alarm 100001?

1. Read the full message text displayed on the SINUMERIK screen for complete details. 2. If action is required, follow the instructions shown in the message. 3. Consult the SINUMERIK alarm manual for alarm 100001 for detailed information about this message. 4. If the message appears unexpectedly, check recent parameter changes or program modifications. 5. For recurring messages, contact Siemens technical support or the machine builder.

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 100001

Siemens 840D 100001 - Function not yet implemented!

SINUMERIK alarm 100001 indicates that a function called by the NC program or HMI is not yet implemented in the current software version. This typically occurs when using newer G-codes, cycle functions, or technology packages that require software updates or optional licenses.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

100001

Siemens 840D 100001 - Function not yet implemented!

Function not yet implemented!

Root Cause Summary

SINUMERIK alarm 100001 indicates that a function called by the NC program or HMI is not yet implemented in the current software version. This typically occurs when using newer G-codes, cycle functions, or technology packages that require software updates or optional licenses.

Safety

Refer to Siemens documentation
Ensure qualified technician performs repairs

Causes and Fixes

1
Check NC program syntax
Review the NC program line where the alarm occurred and identify the specific G-code or M-function causing the issue.
Use the HMI diagnostics buffer to see the exact line number and function name in %1 parameter
2
Verify software version compatibility
Navigate to HMI → Diagnostics → Version and check if the current SINUMERIK software version supports the function.
Do not attempt to modify system files without proper backup
3
Check technology packages
Access HMI → Commissioning → System → Technology packages to verify if required options like turning, milling, or advanced cycles are licensed and active.
4
Update or modify program
Either update SINUMERIK software to support the function or modify the NC program to use alternative compatible functions.

DIY Feasiblemedium confidence

Call a technician if:

·Software reinstallation required
·Hardware modifications needed
·License procurement necessary

Prevention

Verify software compatibility before programming
Maintain current software versions
Document all installed technology packages

Common Mistakes

Assuming all G-codes are universally supported
Not checking license requirements for advanced functions
Using outdated programming examples

Related Alarms

100002 100003 61000 61001

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.