What causes Siemens SINUMERIK alarm 100010?

Part program contains an illegal or unsupported command for the current machine configuration. Parameter or machine data setting incompatible with the commanded operation. Required option or function not enabled on this SINUMERIK control. Incorrect axis assignment or configuration for the commanded function. Software version or compile cycle version mismatch.

How do I fix Siemens SINUMERIK alarm 100010?

1. Note the full alarm message including any parameter values shown (e.g., axis number, block number, channel). 2. Identify the program block or operation that triggered the alarm. 3. Review the SINUMERIK alarm manual for alarm 100010 to identify the specific cause and remedy. 4. Check the relevant machine data parameters referenced in the alarm. 5. If the alarm persists after correcting the program, contact Siemens technical support with the full alarm text and machine data backup.

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 100010

Siemens 840D 100010 - Error in task communication

This alarm indicates a communication error between tasks in the Siemens CNC system, often due to incorrect program syntax or unsupported functions. Fix by identifying and correcting the error in the program or verifying control options.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

100010

Siemens 840D 100010 - Error in task communication

Error in task communication

Root Cause Summary

This alarm indicates a communication error between tasks in the Siemens CNC system, often due to incorrect program syntax or unsupported functions. Fix by identifying and correcting the error in the program or verifying control options.

Safety

Refer to Siemens documentation
Ensure qualified technician performs repairs

Causes and Fixes

1
SAFETY FIRST - Stop all operations
Ensure machine is in STOP mode, spindle stopped, and all axes are stationary before investigating program errors.
2
Locate error block
Check the alarm message for the line number and open the program to find the specific block.
3
Fix the code
Correct any syntax errors, typos, or invalid G-code commands in the identified block.
4
Test and restart
Clear the alarm and run the program in simulation mode first, then test with reduced feed rates to verify the fix.

DIY Feasiblehigh confidence

Call a technician if:

·If the alarm persists after program corrections
·If the required option cannot be enabled without assistance

Prevention

Validate programs using simulation before execution
Ensure G-code matches the control’s capabilities

Common Mistakes

Overlooking the specific line number in the alarm
Misidentifying the subprogram or main program error

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.