axismd.ai
KUKA Robot Controller
System · Basic
KUKA Robot KRC1038 - <object name> COPY ? 4302
This alarm indicates a failure during the copy operation of a KRL program object (module, function, or variable). The system encountered an internal error (code 4302) while attempting to duplicate or copy the specified object, which may prevent proper program execution or backup procedures.
KRC1038
KUKA Robot KRC1038 - <object name> COPY ? 4302
<object name> COPY ? 4302
This alarm indicates a failure during the copy operation of a KRL program object (module, function, or variable). The system encountered an internal error (code 4302) while attempting to duplicate or copy the specified object, which may prevent proper program execution or backup procedures.
Common Causes
- Insufficient memory available for the copy operation
- File system or storage device read/write errors
- Corrupted source object or damaged program data
- Permission or access rights issues preventing the copy operation
- Network connectivity problems if copying from remote storage
Troubleshooting Steps
- 1Note the exact object name from the alarm message and verify the source object exists and is not corrupted
- 2Check available memory on the controller using the System Information menu in KUKA smartHMI
- 3Attempt to manually copy the object using KRC file management tools to isolate the issue
- 4Clear temporary files and perform a system cleanup to free up storage space
- 5Reset the controller and retry the copy operation if memory issues were found
- 6If the problem persists, contact KUKA support with the complete alarm log and object details for diagnostic assistance
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.